Brother MFC-730 Owner's Manual page 49

As an example, your MFC is installed in the United Kingdom, is to be
used for both fax and voice calls, and your national telephone number is
0161-444 5555, then you must set the fax and telephone number parts of
your station ID as: +44 161-444 5555
1
Press Menu, 1, 1, 3. The screen prompts you to enter your fax
number.
2
Enter your fax number (up to 20 digits). The screen displays your
entry.
3
Press Set. The screen prompts you to enter your telephone number.
4
Enter your telephone number (up to 20 digits). If your telephone
number and fax number are the same, enter the same number again.
The screen displays your entry.
See
5
Press Set. The screen prompts you to enter your name or your
"Entering
company name.
Text"
in this
chapter
6
Use the dial pad to enter your name (up to 20 characters). (You can
use the following chart to help you enter letters.)
Press Set to confirm.
7
Press Stop. The screen returns to the date and time.
8
The telephone number you entered is used only for the Call Back
Message and Cover Page features.
If you do not enter a fax number, no additional information can be
entered.
To enter a space, press
characters.
If your Station ID has already been programmed, the screen prompts
"1" to make a change, or "2" to exit without changing.
FAX:
TEL:
NAME:
once between numbers and twice between
I N I T I A L S E T U P
37