Alternating Displays; Function Selection Table - Brother MFC-730 Owner's Manual

30
C H A P T E R F O U R

Alternating Displays

The LCD sometimes alternates between the currently selected option,
and a help message giving brief instructions about how to proceed. The
display you'll probably see most often is shown below, showing you that
when you place a document in the feeder, you can either dial a number to
send it as a fax or press the Mono Copy or Colour Copy key to make
a copy of the document.
FAX: NO. & START
SCAN READY
COPY: PRESS COPY
SCAN READY

Function Selection Table

If you have a basic understanding of how to program your MFC, you can
perform most of the programming settings without the Owner's Manual.
To help you understand the function selections, options, and settings that
are available, use the Function Selection Table below.
1. Fax Functions
1. INITIAL SETUP
Function
1. TONE/PULSE
2. DATE/TIME
3. STATION ID
4. BEEPER
5. PBX
6. CLOCK CHANGE
Description
Selects the dialling mode.
Enter date and time for LCD
display and to print on
transmissions.
Program the name, fax number
to appear on each transmitted
page.
Adjust the volume level of the
beeps when you press a key, an
error occurs or a document is
sent or received.
Turn on if PABX (Private
Automatic Branch Exchange) is
connected to your MFC.
Adjust the MFC's clock by
one hour for summer/winter
time.
Factory Set Chapter
TONE 5
01/01 2000 00:00 5
-- 5
LOW 5
OFF 5
-- 5