Honeywell BW Technologies GasAlertQuattro 1 User Manual page 43

Calibration Interval
Bump Interval
BW recommends to bump test the sensors before each day's use
to confirm their ability to respond to gas by exposing the detector to
a gas concentration that exceeds the alarm setpoints. Verify that
the audible and visual alarms activate. Calibrate if the readings are
not within the specified limits.
1.800.544.2843
a
Note
www.calcert.com
15
10 20
5 25
0 30
Low Alarm
High Alarm
TWA Alarm
GasAlertQuattro
Sensor Configuration
sales@calcert.com