Specifications; Intended Use; Power Supply - Makita GA7060 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
W h eel d iameter
Max . w h eel th ic kness
S pind le th read
Rated speed (n)
O v erall length
Net w eigh t
Safety class
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure

Intended use

The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Pow er supply
The tool should be connected only to a power supply of
t h e same v oltage as in d i c ate d on t h e nameplate, an d
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For public low -voltage distribution
systems of betw een 220 V and 250 V
Only for model GA7060 / GA9060
Switching operations of electric apparatus cause volt-
age fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than .
sumed that there will be no negative effects. The mains
socket used for this device must be protected with a
fuse or protective circuit breaker having slow tripping
c h ara c teristi c s.
Noise
The typical A-weighted noise level determined accord-
ing to EN 6 07 4 5 -2-3 :
Model GA7060
Sound pressure level (L
pA
Sound power level (L ) :
W A
Uncertainty (K) : dB(A)
Model GA7060R
Sound pressure level (L
pA
Sound power level (L ) :
W A
Uncertainty (K) : dB(A)
Model GA9060
Sound pressure level (L
pA
Sound power level (L ) :
W A
Uncertainty (K) : dB(A)
/
Ohms it can be pre-
) : dB(A)
dB (A)
) : dB(A)
dB (A)
) : dB(A)
dB (A)
GA7060 GA7060R
1 8 0mm
7.2mm
M or M
-1
8 ,5 00min
5 .3kg 5 .4 kg
Model GA9060R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mine d a c c or d ing to EN 6 07 4 5 -2-3 :
Model GA7060
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : . m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : . m/s
W ork mo d e : d is c san d ing w it h normal si d e grip
Vibration emission (a
Uncertainty (K) : . m/s
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : . m/s
Model GA7060R
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : . m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : . m/s
W ork mo d e : d is c san d ing w it h normal si d e grip
Vibration emission (a
Uncertainty (K) : . m/s
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : . m/s
Model GA9060
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : . m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : . m/s
6 ENGLISH
GA9060 GA9060R
230mm
6 .5 mm
or / (country specific)
-1
6 ,6 00min
4 5 0mm
5 .5 kg
/ I I
) : dB(A)
pA
) : dB (A)
W A
) : . m/s
2
h , A G
2
) : . m/s
2
h , A G
2
) : . m/s
2
h , D S
2
) : . m/s
2
h , D S
2
) : . m/s
2
h , A G
2
) : . m/s
2
h , A G
2
) : . m/s
2
h , D S
2
) : . m/s
2
h , D S
2
) : . m/s
2
h , A G
2
) : . m/s
2
h , A G
2
5 .6 kg