GE Voluson E Series Service Manual page 161

The directory structure of the full backup data is as follows:
When the backup is saved to an external USB-device, the system has to be informed about the removal of
Note
the hardware. For this purpose every last dialog of "Full Backup Save" and "Full Backup Delete" has a Stop
USB Devices button.
For further details see
page 3-38
.
Voluson E-Series Service Manual
KTD106657 Revision 2
The sub folders have the names fbX where X is a number (e.g.,
Z:\fullbackup\fb1).
The data resides within a directory structure within these sub
folders. It is possible to move the fbX sub folders, even leaving
gaps in the numeration sequence.
However, NO change MUST be made to the contents of the fbX
folders itself, otherwise the backup data cannot be restored!
If the destination „Other drive" is selected, the available drives (e.g., external
USB-memory stick) can be chosen from the pull-down menu.
Figure 4-27 Please stop USB Devices before unplugging!
Section 3.4.15 "General Remarks and Hints when using external USB-Devices" on
Functional Checks
4-35