Sony CPJ-D500 Operating Instructions Manual page 23

Tip
The adjustment for the
PC signal is not reset.
Note
The FUNCTION RESET
button is purposed
hard to press so that
adjustments are not
canceled by mistake.
Adjusting the brightness
1
Press FUNCTION until "BRIGHTNESS" appears.
BRIGHTNESS
2
Press + or – so that brightness becomes appropriate.
• To make brighter, press +.
• To make darker, press –.
The display will go off after 5 seconds.
Resetting the adjustment to the
factory preset level
Press FUNCTION RESET.
The adjustment is reset to the factory preset level.
ON/STANDBY LAMP
POWER PC/VIDEO
FUNCTION
VOL
COUNT DOWN
FUNCTION RESET
SET START
FUNCTION RESET
Adjusting the picture of the video input
23
-EN