Sony CPJ-D500 Operating Instructions Manual page 22

Adjusting the picture of the video input (continued)
Note
"HUE" does not appear
when the PAL color
system video signal is
input.
22
Adjusting the picture of the video input
-EN
Adjusting the hue (NTSC color
system only)
1
Press FUNCTION until "HUE" appears.
HUE
2
Press + or – so that the hue becomes appropriate.
• If the picture is too reddish, press +.
• If the picture is too greenish, press – .
The display will go off after 5 seconds.
Adjusting the color intensity
1
Press FUNCTION until "COLOR" appears.
COLOR
2
Press + or – so that color intensity becomes
appropriate.
• For more color intensity, press +.
• For less color intensity, press –.
The display will go off after 5 seconds.