Adjusting The Picture Of The Video Input - Sony CPJ-D500 Operating Instructions Manual

Adjusting the
picture of the
video input
FOCUS
LOCK
Front stand
You can adjust the brightness, contrast, hue (NTSC
color system only) and color intensity of the video
signal.
If necessary, you can also reset the adjustment to the
factory preset level.
The adjustment items change in the following order
as you press FUNCTION.
Adjustment items
PICTURE: Adjusts the picture contrast.
HUE: If the picture looks too red or green, adjust
the hue (for NTSC color system only).
COLOR: Adjusts the color intensity.
BRIGHTNESS: Adjusts the picture brightness.
Adjusting the picture contrast
1
Press FUNCTION until "PICTURE" appears.
PICTURE
2
Press + or – so that the picture contrast becomes
appropriate.
• For more contrast, press +.
• For less contrast, press –.
The display will go off after 5 seconds.
ON/STANDBY
POWER
FUNCTION RESET
Control panel
Side stands

Adjusting the picture of the video input

LAMP
PC/VIDEO
FUNCTION
VOL
COUNT DOWN
SET START
21
-EN