Adjusting the picture of the RGB input (continued)
18
Adjusting the picture of the RGB input
-EN
Adjusting the brightness
1
Press FUNCTION until "BRIGHTNESS" appears.
BRIGHTNESS
2
Press + or – so that the brightness becomes
appropriate.
• To make brighter, press +.
• To make darker, press –.
The display will go off after 5 seconds.
Adjusting the vertical centering
1
Press FUNCTION until "V CENT" appears.
V CENT
(–) v
V (+)
2
Press + or – so that the picture appears at the center
in the vertical direction.
• To move the picture up, press +.
• To move the picture down, press –.
The display will go off after 5 seconds.