Honeywell X-618 Operation Manual page 15

2. In the login interface, users can choose user name from the dropdown list. After login, the
interface will be shown as below. If the password is wrong, it will display error.
Note:
The user name, password and operation permission need to be set through the configure software.
When the user name is "admin" and the password is empty, the device will directly enter the
broadcast operation interface without logining.
Description of the icon:
Click to display function interface, switch to different operation interface.
Click to get back to home page.
Click to get back to login interface, but the audio will be continually played.
Click to forcibly close all the broadcast zones.
After login, click the icon
Description of the icon:
Broadcast: Users can select zones to process preset task, USB files, speech synthesis,
recorded files, server files and paging.
One-click: Click to broadcast preset task without selecting zones.
Timing: Users can edit the timing record to realize timing function.
Intercom: Click to comminicate with other devices, such as X-NPMS or X-NPMIC.
Monitor: Click to monitor the broadcasted audio, which can be displayed by built-in speaker.
Sys-operation: Click to reset, enable ACK or lamp test.
Volume: Click to set the volume of device, zones or group.
System Status: Click to check fault status of devices.
Device Info.: Click to view related device information, such as device name, ID and IP address,
etc.
can display the function interface.
Function Selecting Interface
9