Paging; One-Click - Honeywell X-618 Operation Manual

Paging

Follow below steps for paging:
1. Choose the broadcast zones.
Click the button "Paging" to initiate the task. The flash indicators of button and microphone
2.
show the device is playing pre-signal, and the lighting indicators mean the paging is ongoing.
3. If the record function is initiated during the paging, device will automatically record the paging
contents. When the record time is over than 60 minutes, it will automatically stop recording.
The device will automatically delete the earliest record file when the space is full. Users can
view and play the recordings from the temporary record but cannot remove from it.

One-click

Click "One-click" button to enter the operation interface. Up to 80 one-click buttons can be
configured as shown below:
Each button can be configured task, including audio source, broadcast policy and zones. The
name of button can be set in configuration software. Click the task button, the task will be initiated,
and click again to stop. Under the public broadcast mode, the normal task is available and the
emergency task button is grey and unavailable. Under the emergency broadcast mode, only the
emergency task is available. The indicator of the button in green means the normal task is
broadcasting and the red means the emergency task is broadcasting. The button in grey means it
is unavailable.
Slide the screen to view more contents if there are many configured buttons. Click the icon
return to main broadcast interface.
One-click Broadcast Interface
to
15