Preparation For Reading And Writing Data - Brother BAS-311H Service Manual

5-3. Preparation for reading and writing data

1
2
Turn on the power switch.
3 Switching to SD data read/write mode
TEST indicator flashes
4
For example, mode No. w2
［Read/write mode list］
PROGRAM No.
Menu display
display
r 1 [-Sew]
w 2 [Sew-]
r 3 [-MEM]
w 4 [MEM-]
r 5 [-PrG]
w 6 [PrG-]
r 7 [-ALL]
w 8 [ALL-]
w 9 [LoG-]
*1: The additional sewing data that can be used with this sewing machine is data which has been created for the BAS-311H.
2650B
3207B
2653B
Additional sewing data is read from the SD card.
Additional sewing data is written to the SD card.
Memory switch settings are read from the SD card.
Memory switch settings are written to the SD card.
Reads sewing program data and cycle program data from the SD card.
Writes sewing program data and cycle program data to the SD card.
Reads all sewing machine data (sewing program data, cycle program data, memory
switch settings and additional sewing data) from the SD card.
Writes all sewing machine data (sewing program data, cycle program data, memory
switch settings and additional sewing data) to the SD card.
Error log data is written to the SD card.
BAS-311H
Insert the SD card into the SD slot.
NOTE:
･
Make sure the SD card is facing the correct way.
･
The cover should be closed at all times except when
the SD card is inserted and removed, otherwise dust
may cause trouble.
While pressing the TEST key, press the ENTER key.
･
" sd" will appear in the PROGRAM No. display and
"read" will appear in the menu display while the SD
card is being read.
･
Once reading of the SD card is complete, the mode
number will appear in the PROGRAM No. display and
the setting for that mode number will appear in the
menu display.
･
The initial mode is additional sewing data reading
mode. (Refer to "Read/write mode list" below.)
Press the △ or ▽ key to select the mode.
Setting items
*
1
5. USING SD CARD
2652B
38