Overview Of Main Menu Items And Their Functions - Bosch Rexroth PS5000 Commissioning And Operating Instructions

4−4 Bosch Rexroth AG
Operation
4.2

Overview of main menu items and their functions

Electric Drives
and Controls
The BT 6.190 permits the operation and programming of spot seam
.
timers, including all the parameters required for welding.
The BOS user interface must be used for additional functions such
as error allocation, backup/restore, switching the SST, logs or the
time.
D Procedure
Function key F1 for direct selection. Possibilities:
− Display and change important parameters of the individual seam
programs (e.g. sequeeze times, under−current times incl. the per-
formances of individual blocks, pause times, current increase/de-
crease times and holding times ).
− The desired seam program (0 to 31) is selected in the display line
("Program_").
D Monitoring
Function key F2 for direct selection. Possibilities:
− Activate/deactivate current monitoring (this can be set separately
for each individual block program)
− Display and modify tolerance limits (this can be set separately for
each individual block program)
− The desired seam program (0 to 31) is selected in the display line
("Program_").
You can then sequentially move through the individual block pro-
grams.
D Last run
Function key F3 for direct selection. Possibilities:
− Information about which seam program ran last in the timer
− For all block programs: display of reference/actual current and av-
erage phase angle in the last run
D Correction
Function key F5 for direct selection. Possibilities:
− Display and modify the corrections for performance and pressure,
separate for seam programs 0 to 31 and the used electrode
D Pressure
Possibilities:
− Display and modify the basic pressure (separate for the individual
seam programs 0 to 31)
D Diagnosis
Possibilities:
− Status display of all I/O signals
BT 6.190 1070087068 / 01