Display Data From The Last Weld - Bosch Rexroth PS5000 Commissioning And Operating Instructions

1070087068 / 01 BT 6.190
Operation
4.5.5

Display data from the last weld

The BT 6.190 can be used to display:
D with which spot seam program thelast weld was carried out
D with which reference and actual currents and which phase angle a
certain program ran last.
Proceed as follows:
L
1. Press the key.
2. Use the or
3. Press the key.
The cursor is in line 1 (Program).
Line 3 indicates which program ran last.
4. To display the data of the last weld of a certain program, enter the
desired program number in line 1 and press key
The BT 6.190 opens a screen containing the reference and actual
currents and the phase angle of the last weld for this program.
Press key to scroll through the run data of the block programs.
5. To display the data of additional spot seam programs:
Press the key until the text "Program" is displayed in the first line.
Continue with 4.
To return to the main menu: press the
You can also use function key F3 to open sublevel LAST RUN
.
(steps 1. to 3.).
Electric Drives
and Controls
key to move the cursor to the "LAST RUN" line.
Bosch Rexroth AG 4−17
.
key.