NETGEAR WAX204 Installation Manual

Installation Guide
Business WiFi 6 AX1800 Access Point
WAX204
Package contents
• Wireless access point
• DC power adapter (varies by region)
• Ethernet cable
• Installation guide
Step 1. Connect the WAX204
Sample connections
Internet
Modem
1. Unplug the modem's power, leaving the modem connected to the wall jack
for your Internet service. (If the modem uses a battery backup, remove the
battery.)
2. Connect the Ethernet cable to the yellow Internet port on the WAX204.
3. Connect the other end of the cable to a LAN port on your modem.
4. Plug in and turn on the modem. (If the modem uses a battery backup, put the
battery back in before you turn on the modem.)
5. Power on the WAX204 and check that the LEDs are lit.
Step 2. Join the default WiFi network
The default WiFi network name (SSID) is "NETGEARXXXXXX", where XXXXXX
represents the last 6 characters of the device's MAC Address, as printed on the
WAX204 label. By default, the WAX204's WiFi network provides WPA2 security.
A randomly generated unique WiFi password is printed on a label on the device.
We recommend that you change the WiFi password to a more secure password
for the default SSID and for the two other SSIDs. For more information, see the
user manual.
To connect your WiFi device to the WAX204's WiFi network, you can use either
the manual method or the Wi-Fi Protected Setup (WPS) method.
Join the WiFi network using the manual method
1. Open the software utility that manages your WiFi connections on the WiFi
device that you want to connect to the WAX204.
This utility scans for all WiFi networks in your area.
2. Find and select the WAX204's WiFi network name (SSID) and connect to its
WiFi network.
The default WiFi network name (SSID) is "NETGEARXXXXXX", where XXXXXX
represents the last 6 characters of the device's MAC Address.
Enter the default passphrase printed on the WAX204 label.
WiFi client
Join the WiFi network using the WPS method
The WAX204's WPS button is on the back panel. If your computer or mobile
device supports WPS, you can use WPS to join the WAX204's WiFi network. See
the instructions or online help for your computer or mobile device.
Step 3. Log in to the WAX204
1. Launch a web browser and enter http://www.routerlogin.net in the
address field.
The Smart Setup Wizard starts.
2. Follow the Smart Setup Wizard prompts.
3. During the setup process, you are required to set a new admin password for
local login. After you set the new password, you must log back in using the
new password.
4. You can also update the firmware if a new version is available.
Note: If you cannot connect the WAX204 to the Internet, see the user
manual for troubleshooting information and instructions on how to log in to
the WAX204 without Internet access.
Note: When the WAX204 is connected to the Internet, the NETGEAR
Business page displays with multiple login and registration options. You can
skip registration and log in to the local browser-based user interface (UI)
temporarily to configure the device.
Continued on the other side