Honeywell Performance Series Quick Installation Manual page 2

Mounting the Camera
The camera can be installed to a tripod, housing, wall mount, or ceiling mount using the 1/4–20 UNC
mounting holes located on the top and bottom of the camera.
Adjusting the Zoom and Focus Settings
Manually adjust the lens zoom and focus settings. If the correct
focus cannot be obtained, press the ABF (Auto Back Focus)
button at the rear of the camera to adjust the back focus.
Configuring the Camera
1. Connect the camera to a Honeywell Performance Series
HQA DVR and log on as the admin user.
2. Right-click to display the shortcut menu, then click Camera Menu. The Menu Operation window
opens.
3. Click Enter to display the camera's OSD menu.
4. To configure the camera, in the Menu Operation window, click the up/down arrows to move through
the menu list, click the left/right arrows to change a menu setting, or click Enter to enter a submenu
( ) or execute a command.
5. After you have finished configuring the camera, scroll down to Exit, and then click Enter to exit the
OSD menu. Right-click to close the Menu Operation window.
© 2017 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences
resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
Regulatory Statements
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Manufacturer's Declaration of Conformance
North America The equipment supplied with this guide conforms to UL 60950-1 and CSA C22.2 No. 60950-1.
Europe The manufacturer declares that the equipment supplied is compliant with the European Parliament and
Council Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(2011/65/EU), General Product Safety Directive (2001/95/EC), and the essential requirements of the EMC directive
(2014/30/EU), conforming to the requirements of standards EN 55032 for emissions, EN 50130-4 for immunity, and
EN 60950-1 for electrical equipment safety.
WEEE (Waste Electrical and Electronic Equipment)
Auto Back Focus button
Correct disposal of this product (applicable in the European Union and other European countries with
separate collection systems). This product should be disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures.
2700 Blankenbaker Pkwy, Suite 150
Louisville, KY, 40299, USA
www.honeywell.com/security
Aston Fields Road, Whitehouse Industrial Estate
Runcorn, Cheshire WA7 3DL, UK
www.honeywell.com/security/uk
+1 800 323 4576 +1 44 (0) 1928 754 028
(North America only) (Europe only)
Document 800-23319 – Rev A – 06/2017
35F Tower A, City Center, 100 Zun Yi Road
Shanghai, 200051, China
www.asia.security.honeywell.com
+86 21 221 96888
(Asia Pacific only)