Advertisement
Functions
SYSTEM SPECIFICATIONS
MODEL
PRODUCT DIMENSIONS
NET WEIGHT
COVERAGE AREA
REPLACEMENT FILTER
OPERATION INSTRUCTIONS
1. Locate a flat stable location with close
access to a power point. Make sure there
is at least 30cm between unit and wall
or other appliances.
2. Connect one end of the USB cable into the
AC adapter and the other end of the USB
cable into the USB port at the back of the unit.
The unit can also be powered by plugging
it into a computer USB port.
3. Plug power adapter into appropriate
electrical outlet.
4. Press power switch to turn on. The LED
light will illuminate, the fan will start running
and the unit will start purifying the air.
5. Press power switch again to turn off LED
light and again to switch the unit off.
Aroma
To add fragrance, turn off unit and lift off the lid.
Remove aroma cup and add 2–3 drops of aroma
oil onto the sponge (Fig 1).
WARNING
It is recommended that asthma sufferers
or those sensitive to fragrances should avoid
adding aroma oils to the water as it may act
as an irritant. Some fragrances may cause
allergic responses in some people.
AIR PURIFICATION SYSTEM
CLI-AP10-W
L 200 x W 200 x H 180mm
0.8 kgs
up to 10m
2
CLI-AP10-RF
Change Filter
The filters used in this Cli-Mate air purifier
are not designed to be cleaned, washed, or
otherwise reused.
The life span and duration of the filter depends
on the quality, surrounding environment and
how often it is used. Regularly check the filter.
If heavily soiled it should be replaced.
To replace the filter, turn off unit and disconnect
the power. Lift off lid, remove old HEPA filter,
discard and replace with new filter.
Cli-Mate Replacement Filter Product Code:
CLI-AP10-RF.
IMPORTANT
Unplug unit from outlet before adding
fragrance or changing the filter.
Fig 1
7
Advertisement
