Web User Interface
On the wireless settings page, you can setup the basic wireless configuration for the access point. The user can choose from 4 different wireless
modes:
y Access Point - Used to create a wireless LAN
y WDS with AP - Used to connect multiple wireless networks while still functioning as a wireless access point
y WDS - Used to connect multiple wireless networks
y Wireless Client - Used when the access point needs to act as a wireless network adapter for an Ethernet enabled device
Click the drop-down menu to select the wireless
Wireless Band
band, 2.4GHz or 5GHz.
Click the drop-down menu to select Access
Operation Mode
Point.
Enter the name of Service Set Identifier (SSID)
Network Name (SSID)
up to 32 characters and is case-sensitive.
Click the drop-down menu to enable or disable
SSID Visibility
broadcast the SSID across the network.
Click the drop-down menu to enable
Auto Channel Selection
automatically selects the channel that provides
the best wireless performance. The channel
selection process only occurs when the AP is
booting up.
Click the drop-down menu to select the desired
Channel
channel. The function is only available when
Auto Channel Selection is Disable.
Note: The wireless adapters will automatically
scan and match the wireless settings.
D-Link DAP-3666 User Manual
Basic Settings
Wireless Settings
Access Point Mode
15