Table of Contents
Advertisement
7. Lift the center riser board to access the LCNP4E/LCNP4E2 board as illustrated in the following
image and remove the riser board from the motherboard.
8. While wearing a grounded ESD wrist strap, unlock the LCNP4E PCI bracket notch, grasp the
LCNP4E/LCNP4E2 card in PCIe Slot 6 at the corners and gently remove the existing card.
9. Place the PCIe bracket filler that was previously removed while installing the LCNP4e/LCNP4e2
card in the empty PCIe slot 6. Lock the bracket notch such that the filler does not move.
- 43 -
Chapter 5 - Servicing
Advertisement
Table of Contents
