Makita XRM10 Instruction Manual page 6

Job site charger radio
Hide thumbs Also See for XRM10:
Table of Contents

Advertisement

and remove battery cartridge. Pull by plug rather than cord whenever discon-
necting the appliance.
Do not leave the AC power adaptor disconnected from the appliance while the
10.
power is supplied from the mains.
Make sure cord is located so that it will not be stepped on, tripped over, or other-
11.
wise subjected to damage or stress.
Do not operate this appliance with damaged cord or plug. If the cord or plug is
12.
damaged, ask Makita authorized service center to replace it in order to avoid a
hazard.
Do not operate or disassemble this appliance if it has received a sharp blow,
13.
Do not charge battery cartridge when room temperature is BELOW 10°C (50°F)
14.
or ABOVE 40°C (104°F). At the cold temperature, charging may not start.
Do not attempt to use the AC power adaptor with a step-up transformer, an
15.
engine generator or DC power receptacle.
Do not allow anything to cover or clog the vents on this appliance.
16.
Do not plug or unplug the power cord and the AC power adaptor with wet hands.
17.
Do not install or remove the battery cartridge with wet hands.
18.
6 ENGLISH
-

Advertisement

Table of Contents
loading

Table of Contents