Makita XRM10 Instruction Manual page 15

Job site charger radio
Hide thumbs Also See for XRM10:
Table of Contents

Advertisement

Snooze
When the alarm sounds, press any button other than
the Power button
to stop the alarm for 5 minutes.
"SNOOZE" will appear on the display.
1.
Press and hold the Menu/Info button
the menu setting.
2.
Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob
to enter the setting. Rotate the Tuning control
knob
minutes.
NOTE: To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can
1.
Press and hold the Power button
the Sleep Timer setting. "SLEEP 60 MINUTES" will be
shown on the display.
2.
Keep holding the Power button
timer options will start switching on the display. Release
the Power button
when the desired Sleep Timer
setting appears on the display. The setting will be saved
and the icon for sleep timer (
display.
NOTE: Your radio will switch off automatically after
the preset Sleep Timer has elapsed.
NOTE: To cancel the sleep timer before the preset
time has elapsed, simply press the Power but-
ton
to turn the radio off.
Loudness
You can get compensation on lower and higher
function.
1.
Press and hold the Menu/Info button
the menu setting.
2.
Rotate the Tuning control knob
<LOUDNESS> appears on the display. Press the
Tuning control knob to enter the setting.
3.
Rotate the Tuning control knob
<ON> or <OFF> to turn on or turn off the loudness func-
tion, then press the Tuning control knob
the setting.
NOTE: To turn off the loudness function, select
<OFF> and press the Tuning control knob
Listening to Bluetooth
You need to pair your Bluetooth
before you can auto-link to play/stream Bluetooth
music through your radio. Paring creates a permanent
"bond" so two devices can always recognize each other.
INFO
to enter
MENU
until "SNOOZE"
.
to enter
. The sleep
) will appear on the
to enter
INFO
MENU
until
to choose
to con-
®
music
®
device with your radio
®
15 ENGLISH
Pairing your Bluetooth
1.
Press the Source button
function. "READY BLUETOOTH" will be shown on the
®
2.
Activate Bluetooth
the device's user manual to allow the paring procedure.
3.
Press and release the Pair button
BLUETOOTH" will be shown on the display and it will
®
Bluetooth
device. Once the name of your radio is
appeared on your Bluetooth
®
your Bluetooth
list.
NOTE: With some mobiles (versions earlier than
®
BT2.1 Bluetooth
device), you may need to input the
pass code "0000".
®
4.
Your Bluetooth
device will be linked with the
radio. Once connected, "CONNECTED BLUETOOTH"
will appear on the display.
You can now play the music in your Bluetooth
via your radio.
Playing Bluetooth
already paired
1.
Press the Source button
function. "READY BLUETOOTH" will be shown on the
2.
Search and link the radio on your Bluetooth
device. Some device may link with the radio
automatically.
You can now play the music in your Bluetooth
via your radio.
NOTE: The radio can pair with 8 Bluetooth
at most. When you pair Bluetooth
this number, pairing history will be overwritten from
the oldest pairing history.
NOTE: If there are 2 Bluetooth
your radio, it will show its availability on both devices.
NOTE: If your Bluetooth
connected to your radio, then you need to manually
reconnect your device again to the radio.
NOTE: If the name of your radio is appeared on your
®
Bluetooth
device list but your device cannot connect
with it, delete the item name of your radio from your
list and pair the device with your radio again following
the steps described previously.
NOTE: The optimum operation range between the
radio and the paired device is approximately 10
meters (30 feet).
NOTE: Any obstacle between the radio and the
device can reduce the operational range.
Disconnecting your Bluetooth
device
1.
Press and hold the Pair button
seconds to disconnect with your Bluetooth® device.
" CONNECTED BLUETOOTH" will turn to be "PAIR
BLUETOOTH".
2.
Press the Power button
®
device
to select Bluetooth
on your device according to
. "PAIR
®
device, press the item in
®
device
®
device which has
to select Bluetooth
®
®
device
®
devices
®
devices more than
®
devices searching for
®
device is temporarily dis-
®
for a few
.
®
®

Advertisement

Table of Contents
loading

Table of Contents