Table of Contents
Advertisement
8.
Rotate the Tuning control knob
desired date format (<DD/MM/YYYY> or <MM/DD/
YYYY>). Press the Tuning control knob
your choice.
Setting the clock time and date
1.
Press and hold the Menu/Info button
2.
Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob
to enter the <SET TIME>.
3.
Rotate the Tuning control knob
hour, and press the Tuning control knob
the setting. Then rotate the Tuning control knob
select the desired minute, and press the Tuning control
knob
4.
Rotate the Tuning control knob
desired year and press the Tuning control knob
knob
to select the desired month, and press the
Tuning control knob
rotate the Tuning control knob
date and press the Tuning control knob
the setting.
Setting the alarm clock
Your radio has two alarms which can each be set to
wake you to AM/FM radio or buzzer alarm. The alarms
may be set while the unit is in standby mode or while
playing.
Setting radio alarm time
1.
Press and hold the radio alarm button
with a beep.
2.
While the radio alarm symbol
rotate Tuning control knob
press Tuning control knob
setting. Then rotate the Tuning control knob
the minute and press Tuning control knob
minute setting.
3.
Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE
DAILY
WEEKDAYS
WEEKENDS
Press the Tuning control knob
4.
Rotate Tuning control knob
(FM/AM) and press Tuning control knob
to select the
.
INFO
MENU
until <TIME>
to select the desired
to
to select the
to
to select the desired
, the
to select the hour and
to select
The alarm will sound
once
The alarm will sound
everyday
The alarm will sound only
on weekdays
The alarm will sound only
at weekends
to select the band
again to
5.
Rotate Tuning control knob
LISTENED> or <PRESET NO.> and press Tuning
control knob
6.
Rotate Tuning control knob
desired volume and press Tuning control knob to con-
NOTE: If new radio alarm station is not selected, the
radio will select the last alarm station.
NOTE: If the selected AM/FM alarm station is not
available when the alarm is sounding, the buzzer
alarm will be used instead.
Setting HWS (Humane Wake System)
buzzer alarm
A beep tone will activate when selecting the HWS
buzzer alarm.
The alarm beep will sound shorter every 15 seconds
for one minute followed by one minute silence before
repeating the cycle.
NOTE: The buzzer alarm can be set when the radio
is turned off.
1.
Press and hold the buzzer alarm button
beep.
2.
While the buzzer alarm symbol
rotate Tuning control knob
press Tuning control knob
setting. Then rotate the Tuning control knob
the minute and press Tuning control knob
minute setting.
3.
Rotate the Tuning control knob
will show the frequency options for the alarm.
The alarm options are as follows:
ONCE
DAILY
WEEKDAYS
WEEKENDS
4.
Press the Tuning control knob
setting.
NOTE:
alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power but-
ton
.
Disabling/cancelling alarms
To disable an active alarm, either press the Power
button
or press and hold the corresponding alarm
button to cancel the alarm.
14 ENGLISH
to select <LAST
to select the
,
to select the hour and
to select
and the display
The alarm will sound
once
The alarm will sound
everyday
The alarm will sound only
on weekdays
The alarm will sound only
at weekends
Advertisement
Table of Contents
