File Menu - Honeywell Notifier ID3000 Manual

ID3000/ID2000 Fire Panel Configuration Tool Manual
DEFAULT DATABASE
The Tool is supplied with a database,
'configuration.mdb', which is used by default if
no other database is selected.
A full printout of summary and
detail uses a lot of paper! Use
Print Preview to choose the
information to be printed.

1.5.3 File Menu

This menu has the following options:
a. Create New Database - allows a new
database to be saved (via a 'Browse'
window).
b. Open Database - allows existing database
to be selected (via a 'Browse' window).
c. Save Database - saves changes to opened
database.
d. Save As - copies the open configuration to
a new database.
e. Print - prints loop configuration data. Print
Preview displays the printable data. It has
buttons (shown at left) to:
i Select which pages of printable information
(summary and detail) are displayed by the
preview.
ii Zoom in and out of the displayed page(s).
iii Print via a standard window.
i v Close the Print Preview.
Note: To print panel settings, see Section 2.
To print the Control Matrix, see
Section 4.2.3. To print zone descriptions,
see Section 1.5.9.
f. Standard windows functions - Print Setup
and Exit.
1 - 6 997-291, Version 3.05
November 2010