Cisco TelePresence ISDN Link Administrator's Manual page 82

Cisco TelePresence ISDN Link
Contents Introduction
Connecting the cables
Connect the cables as described in steps A to D.
CAutIoN: Always use the AC-DC adapter shipped with the product.
1A
1. Select one of the three options for the ISDN
line connection:
A. Connect the ISDN cable(s) between the
ISDN BRI port(s) and the ISDN line(s),
B. or, connect the ISDN cable between
the ISDN PRI port and the ISDN line,
C. or, connect the V.35 cable between the
Net port and the external network line.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started
1B 1C 2
2. For system configuration, connect a
Category 5e ethernet cable between the
ethernet port on the ISDN Link and the LAN
network.
3. Connect a Category 5e ethernet cable
between the endpoint port on the ISDN Link
and the ethernet port on the endpoint.
4. Connect the supplied power adapter
between the power connector and an
electrical outlet.
CAutIoN:
shipped with the product.
Software upgrade Status information
3 4
Always use the AC-DC adapter
82
Administrator Guide
System settings Appendices Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.