Network Setting Menu - Sony HKCU-HB10 Maintenance Manual

4-5. Network Setting Menu

Page Menu / Menu Image
N00 IP ADDR SET
N01 ETHER I/F CONF
N02 700PTP SETTING
N03 NETWORK RESET
[|||||]: The settings in the box are default values.
4-16 (E)
Item Setting
HOST IP ADDRESS 0 to 255
SUB NET MASK 0 to 255
DEFAULT GATEWAY 0 to 255
SET
AUTO NEGOTIA- ON /OFF
TION
AUTO MDIX ON /OFF
CONNECT SPEED 100M /10M
DUPLEX MODE FULL /HALF
MDI/MDIX SELECT MDI /MDIX
LINK CONDITION (UP) / (DOWN)
SET
NS MODE LEGACY /
BRIDGE/MCS
MCS MODE (CLIENT)
CCU NO ( blank , 1 to 96)
MASTER IP AD- 0 to 255
DRESS
ALL RESET
Description
Sets the host IP address.
Sets the subnet mask.
Sets the default gateway.
Refl ects all the above settings.
Sets auto negotiation.
Sets auto MDIX.
Sets the connection speed.
Sets the communication method.
Sets the communication line.
Displays the network communication
status.
Refl ects all the above settings.
Sets the communication mode.
Displays that the CCU is the client.
Displays the CCU number.
Sets the IP address of the master device
in the MCS mode.
Returns the network-related information
status to the factory default status.
HKCU-HB10