Alignment; Preparation; Equipment Required; Connection And Lnitial Setting - Sony DXF-701 Service Manual

Electronic viewfinder
Table of Contents

Advertisement

3-1. PREPARATION

3-1-1. Equipment Required

1. Pattern box PTB-500
Sony part number J-6029-140-B
2. Resolution chart
Sony part number J-6026-100-A
3. White Window chart
4. Video camera DXC-D30/D30P (for DXF-701/701CE)
DXC-D30WS/D30WSP (for DXF-
701WS/701WSCE)
5. Camera Adaptor CA-537/537P, etc.
6. AC Adaptor CMA-8/8CE/8A/8ACE
7. Camera Cable CCQ-2BRS
8. B/W monitor PVM-91/91CE or equivalent
9. Oscilloscope
10. Waveform monitor
11. Digital voltmeter
12. Frequency counter
3-1-2. Connection and Initial setting
CA-537/537P, etc
VTR/CCU/CMA
CCQ Camera cable
To VIDEO IN terminal
B.B cable
VIDEO OUT
CAMERA/CCU
DXF-701 (UC)
DXF-701CE (CE)
SECTION 3

ALIGNMENT

DXF-701/701CE
DXF-701WS/701WSCE
DXC-D30/D30P
DXC-D30WS/D30WSP
Black and White monitor
CMA-8/8ACE
camera adapter
To an AC outlet

3-1-3. Notes on Adjustment

1. This "ALIGNMENT" is used for the adjustment of
DXF-701/701CE and DXF-701WS/701WSCE.
Therefore, when adjusting DXF-701/701CE, use the
video camera DXC-D30/D30P.
Also, in case of DXF-701WS/701WSCE, use the video
camera DXC-D30WS/D30WSP.
2. When adjusting DXF-701WS/701WSCE, set the DXC-
D30WS/D30WSP to "4:3" position. But, when
performing procedure 7 of "3-2-6. Picture Frame
Adjustment", set the DXC-D30WS/D30WSP to "16:9"
position.
Therefore, regarding the setting manner of "16:9" or
"4:3", refer to item of "Menu screen" of "2-7.
SERVICE MODE OPERATION" in the service
manual DXC-D30WS/D30WSP Vol.1, select the
ADVANCE menu "PAGE 9", and set "16:9" or "4:3".
2 3 meters
• Initial setting
1. Setting of Switches and Controls
Video Camera
OUTPUT switch/camera side → CAM/DCC OFF
GAIN switch/camera side → 0 dB
Viewfinder DXF-701/701CE/701WS/701WSCE
CONTRAST control → Fully clockwise
BRIGHT control → Mechanical center
Lens
IRIS AUTO/MANU → AUTO
2. Preparation for picture
(1) Adjust the lens zoom so that the Resolution chart
frame coincides the underscanned picture frame on
the monitor.
(2) Adjust the iris control for the best resolution of the
monitor.
PTB-500
3-1 (E)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxf-701ceDxf-701wsDxf-701wsce

Table of Contents