Breville Conical Burr BCG450XL /A Instruction Booklet page 5

OpERATING
your Breville Conical Burr Grinder™
OpERATING YOUR BREVILLE CONICAL BURR GRINDER ™
Before first use
Before first use, remove any promotional
stickers or packaging material attached to
your coffee grinder.
1. Remove the Bean Container, Bean
Container Lid and Ground Coffee
Container and wash in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
Before each use, ensure Grinding
Chamber and Ground Coffee Container
are clean and empty.
2. Remove the Burr Grinder inside the
Grinding Chamber by gripping the small
inner black plastic frame and pulling out
the top ring.
3. Using a soft cloth, wipe off any excess
protecting oil from the Burr Grinder and
place it back into the Grinding Chamber.
4. Place the Bean Container into the
Grinding Chamber so the 'ALIGN' arrow
on the Bean Container aligns with the
'ALIGN' arrow on top left-hand side of
the Grinder. Turn the Bean Container
clockwise to lock into position.
5. Measure the desired quantity of whole
coffee beans or spices directly into the
Bean Container and cover with Bean
Container lid.
6. Plug the Grinder into a 110v
power outlet.
7. To select the desired fineness of grind,
rotate the Bean Container and align the
white marker on the front panel of the
Grinder with one of the following settings:
COARSE – Percolator
MEDIUM – French Press
FINE – Filter
EXTRA FINE – Espresso
SUPER FINE – Turkish
NOTE:
In order to remove any excess
protecting oils from the Burr
Grinder, it is necessary to grind
1.75 oz (50g) of coffee beans on the
Super Fine (Turkish) setting. Discard
this initial ground coffee.
8. Rotate the Timer Selector Dial to select
the desired grinding time.
9. Press the 'START' button on the front
of the Grinder to begin grinding. The
Coffee Grinder will begin grinding
the coffee/spices directly into the
Ground Coffee Container and will stop
automatically when grinding is complete.
To stop the grinding cycle at any time,
push the 'START' button again. If the
'START' button is pressed again, the
grinder will start from the beginning of
the timed cycle.
10. Remove the plug from the power outlet.
11. Gently tap the side of the Grinder, above
the Ground Coffee Container, so that
any grinds remaining in the release
chute are released into the Ground
Coffee Container.
12. Remove the Bean Container, Bean
Container Lid and Ground Coffee
Container and wash in warm soapy
water with a soft cloth. Rinse and
dry thoroughly.
13. Wipe the Grinding Chamber with a
soft dry cloth and replace the Bean
Container, Bean Container Lid and
Ground Coffee Container back
into position.
14. Rewind the power cord into the cord
storage area located under the
Grinder base.
9