System Memory Configurations
The CPV5350 has one 168-pin DIMM site for memory expansion.
The DIMM sites accept industry standard PC100 compliant DIMM
modules (8, 16, 32, 64, 128 or 256Mb) with or without ECC. You can use
either registered or unbuffered memory modules.
Installing DRAM DIMMS
To install a DIMM, locate the memory bank on the single board computer.
Before installing a DIMM, remove power from the system and disconnect
all power cords. After power is removed. remove the CPV5350 from the
chassis.
Only qualified, experienced electronics personnel should
!
access the interior of a chassis. The components of the
CPV5350 are sensitive to static discharge. Place components
Caution
on a static-dissipative surface or into a static-shielding bag
after removing them from the chassis.
4Installing Options
4
4-1