Cisco Headset 500 Series Manual page 9

Accessories
• USB Y-Cable: for Cisco IP Phones without a USB port
• Mini USB Cable: for PC or Mac.
• Mini USB to USB-C cable: available separately for PC or Mac devices.
Figure 9: Multibase LEDs
The following table describes the Cisco Headset 560 Series Multibase multibase LEDs.
Table 4: Multibase LEDs
Number
1
2
Name
Battery Status LED
Call Status LEDs
Cisco Headset 561 and 562 with Multibase
Description
Indicates the headset battery charge and base status:
• Headset battery strength—LEDs blink and change to
solid as the battery charges
• Headset update in progress—LEDs blink in sequence,
left to right
• Headset and base not paired—All LEDs blink
• Power save mode—Middle LED shows solid
The base enters power save mode when there is no call source
connectivity after 10 minutes.
Alerts you to the call state of each source:
• Active Source—Steady white
• Incoming call on a selected source—Blinks green
• Incoming call on an unselected source—Blinks green
• Active call—Steady green
• Call on an inactive source—Pulses green
Accessories
9