Personal Safety; Safety Conventions - Honeywell 854 ATG Series Instruction Manual

2.2 Personal safety

Safe execution of the procedures in this manual requires technical experience in handling tools, and
knowledge of safety regulations in handling electrical installation in hazardous environments.
The sequence of steps in a procedure may also be important from the point of view of personal safety and
prevention of damage; it is therefore advised not to change the sequence of procedure steps or modify any
procedure in any other way.
In hazardous areas it is compulsory to use personal protection and safety gear such as:
hard hat, fire resistive overall, safety shoes, safety glasses and working gloves.
Avoid possible generation of static electricity. Use non-sparking tools and explosion proof testers.
Do not open any of the instrument covers while power is still connected.
Never start working before the work permit is signed by all parties.
Pay attention to the kind of product in the tank. If any danger for health, wear a gas mask

2.3 Safety conventions

"Warnings", "Cautions", and "Notes" have been used throughout this manual to bring special matters to the
immediate attention of the reader.
• A Warning concerns danger to the safety of the technician or user;
• A Caution draws attention to an action which may damage the equipment;
• A Note points out a statement deserving more emphasis than the general text, but does not deserve a
"Warning" or a "Caution".
Page 10
Warning
and take all necessary precautions.
Safety