Cisco Linksys WRT54GL Quick Installation Manual page 5

PPTP
If your ISP specifies PPTP as your
connection type specified by your
ISP, then select PPTP.
Internet IP Address
Internet IP address specified by your
ISP.
Subnet Mask
Mask specified by your ISP.
Gateway
Enter the Gateway IP
address specified by your ISP.
User Name
Enter the User Name of
your account.
Password
Enter the Password of
your account.
Keep Alive or Connect on
Demand Select Keep Alive if you
always want to be connected to your
ISP, or select Connect on Demand
if you are charged for the time that
you are connected to your ISP.
Telstra
Telstra is a service used in Australia
and New Zealand only. If you are
using an HBS connection, check with
your ISP for setup information.
L2TP
L2TP is a service used in Israel only.
If you are using an L2TP connection,
check with your ISP for setup
information.
E.
After you have entered your
Internet connection type
settings, click Save Settings.
Enter the
Enter the Subnet