Optional Accessories - Makita XEC01 Series Instruction Manual

State of abnormality
Abnormal vibration:
stop the machine immediately!
Cutting tool and motor cannot stop:
Remove the battery cartridge
immediately!
Poor cutting performance
Water leaks from the inlet.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Abrasive cut-off wheel
• Diamond wheel
• V-belt
• Coupling sleeve
• Box wrench
• Hex wrench
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
Probable cause (malfunction)
Improper attachment of the wheel.
The drive system does not work
correctly.
Electric or electronic malfunction.
It is time to replace the wheel.
Water is leaking from the O-ring part.
15 ENGLISH
Remedy
Install the wheel as instructed in this manual.
Tighten the bolt to secure the wheel firmly.
Ask your local authorized service center for repair.
Remove the battery cartridge and ask your local
authorized service center for repair.
Replace the wheel with new one.
Ask your local authorized service center for repair.