Replacing Carbon Brushes; Optional Accessories - Makita HP0300 Instruction Manual

Replacing carbon brushes

► 1 . Limit mark
Check the carbon brushes regularly.
Replace them when they wear down to the limit mark.
Keep the carbon brushes clean and free to slip in the
holders. Both carbon brushes should be replaced at the
same time. Use only identical carbon brushes.
1.
Use a screwdriver to remove the brush holder caps.
2. Take out the worn carbon brushes, insert the new
ones and secure the brush holder caps.
1
► 1 . Brush holder cap

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Drill bits
• Driver bits
• Socket bits
• Tungsten-carbide tipped drill bit
• Blow-out bulb
• Hook
• Driver bit holder
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
1
9 ENGLISH