Honeywell ADPRO iFT Series Quick Setup Manual page 14

ADPRO iFT Series Quick Setup Guide
3. Click Add. The following window appears:
4. Provide the following information:
Item
Name
IP Address
RTSP Port
Control Port
Connection
Type
Username
Password
An example of a filled-in screen:
5. Click OK. The new XO device appears in the list.
14
Description
Type a meaningful name for the XO device.
Type the IP address or DNS hostname of the XO device (default IP address is
10.0.0.10).
Type the RTSP port number (default is 554) and the control port number (default
is 2000).
Select the TCP or UDP protocol. UDP is recommended, but TCP may be required if
the connection goes through a router that blocks the UDP packets.
Enter the user ID/username and password of an existing user to log on to the XO
device. The default user ID is 0. The XO device has 666777 as the initial password
which is changed at the first login.
Note
Entering a password is optional. If you leave the Password box blank,
you have to fill in the password manually each time you connect to the
device.
ADPRO
27929_07