Advertisement
Quick Links
TABLE OF CONTENTS
1. THE PRODUCT
1.1 PRODUCT SNAPSHOT
1.2 OPERATION
2. INSTRUCTIONS FOR USE
2.1 SWITCHING THE OMEGA CYLINDER ON / OFF
2.2 PUTTING A WATCH INTO THE OMEGA
CYLINDER OR REMOVING IT
2.3 TORQUE LIMITER (protection against jamming)
2.4 CHANGING THE BATTERIES
2.5 BATTERY POLARITY
3. BLUETOOTH CONFIGURATION
3.1 ACTIVATING BLUETOOTH MODE
3.2 CONFIGURING STANDARD SETTINGS
3.3 CONFIGURING ADVANCED SETTINGS
4. SPECIFICATIONS
1
2
2
3
5
6
6
8
8
10
12
14
Advertisement
Related Manuals for Omega Cylinder
Summary of Contents for Omega Cylinder
- Page 1 1. THE PRODUCT 1.1 PRODUCT SNAPSHOT 1.2 OPERATION 2. INSTRUCTIONS FOR USE 2.1 SWITCHING THE OMEGA CYLINDER ON / OFF 2.2 PUTTING A WATCH INTO THE OMEGA CYLINDER OR REMOVING IT 2.3 TORQUE LIMITER (protection against jamming) 2.4 CHANGING THE BATTERIES 2.5 BATTERY POLARITY...
- Page 2 2 Top lid screw 2.1 SWITCHING THE OMEGA CYLINDER ON / OFF (for changing the battery). To switch the OMEGA Cylinder on, press the ON / OFF 3 ON/OFF button + LED indicator. button (number 3 in figure 1.1). The white LED lights up to confirm that the button has been pressed.
- Page 3 When the batteries are nearly flat, the LED may no The OMEGA Cylinder only checks for the presence of longer light up. The motor will continue to turn, but can a watch when it begins to rotate. If the watch is removed be expected to do so more slowly.
- Page 4 (refer to chapter 3.3). 2.3 TORQUE LIMITER (protection against jamming) The OMEGA Cylinder has a motor current controller that protects against jamming. If the motor current exceeds a predefined value (see chapter 3.3), it will turn off com- pletely to protect the mechanism and avoid draining the batteries.
- Page 5 If the application is closed, or if the winder watch winder, download the application “OMEGA is disconnected, it will revert to its normal mode. If the LE CYLINDER” to your computer. It can be found at: ON/OFF button is pressed while the Bluetooth mode is www.omegawatches.com/omega-lecylinder.
- Page 6 3.2 CONFIGURING STANDARD SETTINGS This window can be used to select the direction of rota- Once the application is launched, click the “Open” tion (clockwise, “CW”, anti-clockwise “CCW”, or both) button. The interface will automatically retrieve the as well as the number of rotations. If only one direction is settings saved in the rotating winder and display them in selected, the corresponding box for the opposite direc- the appropriate fields.
- Page 7 Monitoring 3.3 CONFIGURING ADVANCED SETTINGS The advanced settings mode can be used to adapt the The “Monitoring” field allows continuous checking of rotating watch winder to specific situations (e.g. the certain settings read by the rotating winder. “Motor cur- watch not being detected due to a special strap or rent”...
- Page 8 select a “Detection Threshold” value about 20% lower. For example, if you read “100” reduce it to “80”. Then press “Update” and disconnect the winder. 4. SPECIFICATIONS Power supply Four AA LR6 lithium/alkaline 1.5V batteries Battery life Around 2 years (at 700 turns per day) Rotation speed 10 turns per minute Configuration...