Makita 4112H Technical Information page 8

R
epair
< 8 > Mounting wheel cover and base
( 1 ) After mounting plate B to bearing box, mount wheel cover section to the machine with aligning the hole A
with the bearing box. See Fig. 25.
( 2 ) Aligning the three screw holes of pressure plate with the same of baring box, mount pressure plate
to the bearing box. And then, fix the pressure plate to the bearing box with 3 pcs. of hex bolt M5x14.
See Fig. 26.
( 3 ) Fix the wheel cover section to the gear housing with 2 pcs. of hex bolt M8x20. See Fig. 27.
The mounting of wheel cover section to machine has been completed with this stage.
Hole A
Bearing box
Fig. 25
( 4 ) Mount base to the machine by secureing with wing bolt M8x20 and 2 pcs. of hex bolt M6. See Fig. 28.
Wheel cover section
Plate B
Hex bolt
M8x20
Hex bolt
M8x20
Fig. 27
Hex bolt M6
Base
Fig. 28
Fig. 26
Wing bolt M8x20
Flat washer 8
Spring washer 8
P 8 / 11
Pressure
plate
Hex bolt
M5x14