Safety; General Safety Instructions; Instructions, Standards And Regulations; Appliance Description - AEG MTH 350 Series Operation And Installation

Installation - for contractors
instAllAtion

7. Safety

Only a qualified contractor should carry out installation,
commissioning, maintenance and repair of the appliance.
7.1

General safety instructions

We guarantee trouble-free function and operational relia-
bility only if original accessories and spare parts intended
for the appliance are used.
Material losses
!
Observe the max. permissible inlet temperature.
Higher temperatures may damage the appliance. you
can limit the inlet temperature by means of a central
thermostatic valve.
Material losses
!
Only operate the appliance with non-pressurised
taps.
30
7.2

Instructions, standards and regulations

note
Observe all applicable national and regional regula-
tions and instructions.
The specific electrical resistance of the water must not fall
below that stated on the type plate. In a linked water net-
work, factor in the lowest electrical resistance of the water
(see chapter "Specification / Data table"). Your water sup-
ply utility will advise you of the specific electrical water
resistance or conductivity.

8. Appliance description

8.1

Standard delivery

The following are delivered with the appliance:
º Sieve inside the cold water inlet
º Special aerator "SR"
º Company logo for oversink installation