Crane / Hoist - GE ABB ReliaGear SB Installation, Operation And Maintenance Manual

R E L I A G E A R ® S B S W I TC H B O A R D S
6
—

Crane / Hoist

02
Lifting hooks as installed
—
03
Lifting the switchboard
with a crane or hoist
DANGER
WARNING
—
02
Caution: The weight of the switchboard can vary.
CAUTION
Check the weight of the section against the
capacity of the crane when lifting.
Observe the following points when lifting the
NOTICE
equipment:
• Do not pass cables or ropes through support
holes
SAFETY
INSTRUCTIONS
• Always use load-rated, inspected, and approved
shackles or safety hooks to attach hoisting
equipment to the lifting points.
• Rig slings so that the legs are no less than 45°
from horizontal, as shown in Figure 3
Lifting slings, spreaders, blocking, and other lifting
equipment is not included with the switchboard.
45° minimum
—
03