Honeywell Galaxy Manual page 28

The transfer of programming data is made in the sequence of elements selected. The progress of each
element is displayed as a bar in the Copy Site window, accompanied by a percentage completion figure.
When all the specified elements have been copied, the Transfer Complete message is displayed. Click OK
or press ENTER to clear this window.
Overwriting Site Data
The Program|Overwrite Site option allows the programmed data on the PC to overwrite the programming
data on the Galaxy control panel or the RS232 Interface Module. The data to be copied is stored in the open
Galaxy Gold site file and can be viewed and modified using the Program|Program Data option.
When this option is selected the Select Program Elements window is displayed. This allows selection of the
programmed data elements to be overwritten on the Galaxy control panel or RS232 Interface Module.
Elements with a checked box ( ) are overwritten. Selection is made using the:
⋅ mouse - point and click to select/deselect the required elements to be overwritten. Click on OK to
begin overwriting the selected elements.
⋅ keyboard - use the
select/deselect. Press ENTER to begin overwriting the selected elements.
The Set All button selects all of the elements for overwriting. The Clear All button deselects all of the
elements, allowing the user to quickly select a small number of elements to be overwritten.
When overwriting the site data the range selection options are available for codes, zones, outputs and links
in exactly the same way as copying site data.
Note: If the User Codes element is selected to be overwritten, when ENTER is pressed or OK clicked,
Galaxy Gold prompts the user to enter the Manager PIN for the site being overwritten.
If the PC is transmitting the programming data to an RS232 Interface Module, then:
⋅ If the Green COPY LED (LD3) is lit, the Manager PIN for the Galaxy site currently open must be entered.
⋅ If the Green COPY LED (LD3) is not lit, press ENTER.
This is to ensure that Galaxy control panel Manager authorisation for modifying site user codes has been
given. If the PIN entered does not match the Manager PIN for the Galaxy control panel, then
Program|Overwrite Site option is terminated.
The transfer of programming data is made in the sequence of elements selected. The progress of each
element is displayed as a bar in the Overwrite Site window, accompanied by a percentage completion
figure. When all the specified elements have been copied, the Transfer Complete message is displayed.
Click OK or press ENTER to clear this window.
and keys to move to the required element and press the Spacebar to
Page 24