Designed Lifetime; Logistics; Certification; Declaration Of Conformity - Honeywell Krom Schroder DG H Series Operating Instructions Manual

Pressure switches for gas
Table of Contents

Advertisement

Designed lifetime

This information on the designed lifetime is based on
using the product in accordance with these operating
instructions. Once the designed lifetime has been
reached, safety-relevant products must be replaced.
Designed lifetime (based on date of manufacture) in
accordance with EN 13611, EN 1854 for pressure
switches:
Medium
Switching cycles
Gas
50,000
Air
250,000
You can find further explanations in the applica-
ble rules and regulations and on the afecor web-
site (www.afecor.org).
This procedure applies to heating systems. For
thermoprocessing equipment, observe local regu-
lations.

Logistics

Transport
Protect the unit from external forces (blows, shocks,
vibration).
Transport temperature: see page  7 (Technical
data).
Transport is subject to the ambient conditions de-
scribed.
Report any transport damage on the unit or packag-
ing without delay.
Check that the delivery is complete, see page 2
(Part designations).
Storage
Storage temperature: see page 7 (Technical data).
Storage is subject to the ambient conditions de-
scribed.
Storage time: 6 months before using for the first time.
If stored for longer than this, the overall service life will
be reduced by the corresponding amount of extra
storage time.
Packaging
The packaging material is to be disposed of in ac-
cordance with local regulations.
Disposal
Components are to be disposed of separately in
accordance with local regulations.

Contact

Contact
If you have any technical questions, please contact
your local branch office/agent. The addresses are
available on the Internet or from Elster GmbH.
We reserve the right to make technical modifications
in the interests of progress.
Designed lifetime
Time [years]
10
10

Certification

Declaration of conformity

We, the manufacturer, hereby declare that the product
DG with product ID No. CE-0085AP0467 complies
with the requirements of the listed Directives and
Standards.
Directives: 2014/35/EU – LVD, 2014/30/EU – EMC,
2011/65/EU – RoHS II, 2015/863/EU – RoHS III
Regulation: (EU) 2016/426 – GAR
Standards: EN 1854:2010
The relevant product corresponds to the tested type
sample.
The production is subject to the surveillance proce-
dure pursuant to Regulation (EU) 2016/426 Annex III
paragraph 3.
Elster GmbH
Scan of the Declaration of conformity (D, GB) – see
www.docuthek.com
SIL, PL
Safety-specific characteristic values, see Safety
manual/Technical Information DG (D, GB, F) –
www.docuthek.com
RoHS compliant, Eurasian Customs Union,
AGA approved
Directive on the restriction of the use of
hazardous substances (RoHS) in China
Scan of the Disclosure Table China RoHS2 – see
certificates at www.docuthek.com
Strotheweg 1, D-49504 Lotte (Büren)
hts.lotte@honeywell.com, www.kromschroeder.com
GB-8
AGA
Elster GmbH
Tel. +49 541 1214-0
Fax +49 541 1214-370

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krom schroder dg n seriesKrom schroder dg i seriesKrom schroder dg 10hKrom schroder dg 10nKrom schroder dg 50hKrom schroder dg 50n ... Show all

Table of Contents