Table of Contents
Advertisement
MBeacon User's Guide
9
Installation
Installing MBeacons in a system requires compatible wireless gas
monitors, an access point such as a RadiantReader and a PC running
ProRAE Guardian.
Simplified system. This shows a system in which there are three
MBeacons and a single wireless monitor (a ToxiRAE Pro). The
MBeacons send a signal to ToxiRAE Pro, which relays the RSSI
signal and relative signal strength and each MBeacon's ID to
ProRAE Guardian. A map in ProRAE Guardian includes data that
corresponds to each MBeacon's location. The Location Engine in
ProRAE Guardian uses the received signal strength and location
of each MBeacon relative to the monitor to triangulate its location.
30
Advertisement
Table of Contents
