Exit - Honeywell MBeacon User Manual

Note: If you make a mistake, you can cycle through the digits by
pressing [MODE] and then using [Y/+] and [N/-] to change the number
in each position.
Once all the four digits have been entered, press [MODE] again to see
the following screen appear.
 Save your changes by pressing [Y/+].
 Exit without saving changes by pressing [N/-].
 Step back to the first digit by pressing [MODE].
Saving the password takes a moment, and a screen indicates that it has
been successfully saved:

8.1.6 Exit

Scroll until "Exit" is selected.
Press [MODE] to return to the Programming Menu.
Note: If you do not make a selection in 60 seconds, it automatically exits
to the menu.
MBeacon User's Guide
22