Advertisement
W
iring diagram
Fig. D-2
Wiring without Choke Coil
Put the slack of the connecting
lead wire (blue) of Brush holder
in the illustrated position.
Brush
holder B
Brush
holder A
Fix the Lead wires
with Lead wire
holder.
soldered
portion
If Noise suppressor
is used, put it in the
position illustrated.
Noise
suppressor
soldered
portion
Switch
Fix the Lead wires with
Lead wire holder.
In case of soldering of Lead wires to the reversing
circuit, inflect the Lead wires at the soldered portion
for smooth assembling of Switch to Housing.
Put the slack of the Connecting
lead wire (red) of Brush holder
between Switch and the wall of
grip portion.
Fig. D-2A
Wiring with Choke Coil
Switch
Noise suppressor
P 8 / 8
Lead wire
(orange)
If Choke coil is
used, put it in the
position illustrated.
Choke coil
Advertisement
