Sw Itching M Odes; Audio Control Setting - Kenwood DPX-4010 Instruction Manual

General features
Sw it ching M odes

Sw itching M odes:

Each time you press the SRC (source) button, the mode
sw itches as follow s:
Tuner mode
Tape mode
CD mode
External disc control mode 1
External disc control mode 2/AUX mode
Standby mode
Selecting standby mode:
Press the SRC button repeatedly and sw itch to "ALL OFF" .
When "ALL OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off w hile leaving the
pow er to the unit on. Use this mode w hen you w ant to have
the display illuminated but don' t w ant to listen to anything.
N OTE
• The mode sw itches to the next mode from any mode w hich
cannot be used.
• The external disc control mode w ill differ depending on the unit
that is connected.
• The AUX mode is available only w hen the changer / AUX
sw itching adapter (KCA-S210A or CA-C1AX) or CD changer
(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is
connected to this unit.
During the AUX mode, "AUX INPUT" w ill show in the display.
When the CA-C1AX is being used, the AUX M ode w ill replace
the External Disc Control M ode.
A udio Cont rol Set t ing
Adjust various param eters of sound quality.
1
Press the AUD button for at least one second to enter the
control mode.
2
Selecting mode
Press either the 4 or ¢ button.
Each time the button is pressed, the adjustment mode w ill
change.
Please refer to the follow ing for the contents of the
adjustment modes.
3
Adjust each mode
Press the FM /AM button.
Please refer to the follow ing for the adjusting values.
4
Press the AUD button for at least one second to end the
control mode.
"Balance" : Adjust the balance level.
Setting values: Left 15 – Right 15
"Fader" : Adjust the fader level.
Setting values: Front 15 – Rear 15
"NON FAD" : You can set the non-fading sound output to either
on or off.
Setting values: "NON FAD On" (ON) – "NON FAD Off" (OFF)
N OTE
This mode is available only w hen the non-fading output function
is set to on.
— 8 —