Dsp/ Equalizer/ Analyzer Control Features; Dsp (Digital Signal Processor); Preset Equalizer Selection - Kenwood DPX-4010 Instruction Manual

DSP/ Equalizer/ Analyzer control features

7 NAME SET
DISP
ATT
S. A
S.A S.A
B.S
DSP
1 2 3 4 5
DSP DSP BNR SCN RDM REP D.SCN
Sound field control name/
DSP indicator
Preset Equalizer name/
Spectrum analyzer name
Spectrum analyzer display
CD EJECT OPEN
0
¢
4
FM
FM FM + +
DISC
7 PWR OFF
METAL 7 AUD 7 FNC
AM
SRC
6 EQ EQ 38 AM– AM–
M.RDM
EQ
EQ indicator
— 22 —
D SP (D igit al Signal Processor)
A DSP is a device w hich uses digital control to correct the
audio signal and produce sound effects that can com pensate
for the sm all passenger com partm ent of a vehicle.
The DSP indicator lights up w hen the DSP m ode is on.
This function reproduces m any different virtual sound fields
such as of a concert hall w ithin a vehicle.
Sw itching the Sound Field Control:
1
Press the DSP button.
"DSP mode" is displayed once the DSP mode is entered.
2
Each time you press the DSP button, the sound field control
sw itches as follow s;
Outputs the sound source as-is w ithout added
"Bypass"
effects.
Recreates the gree and full sound of a large
"Stadium"
stadium.
Reproduces a larger space inside the vehicle to
"Concert"
recreate the live feel of a concert arena.
Fully reproduces the lively beat sound of a small
"Club Disco"
disco club.
Reproduces the reverberation effects of a
"Church"
traditional European cathedral.
Faithfully reproduces the source under optimum
"Listening"
acoustic conditions as in a living room.
3
Press the DSP button for at least one second to end the DSP
mode.
N OTE
If you make no button operation for 10 seconds, the DSP mode
is automatically canceled.