Tuner Features Tuning; Station Preset M Emory; Station Name Preset (Snps) - Kenwood DPX-4010 Instruction Manual

Tuner features
Tuning
1
Press the SRC (source) button repeatedly to select the tuner
mode. "TUNER" is displayed w hen the tuner mode has been
selected.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band sw itches
betw een the FM 1, FM 2 and FM 3.
Press the AM button to select the AM band.
3
• Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek low er frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one w ith the next highest number), and the 4 button to
move to the last preset station (i.e., the one w ith the next
low est number).
N OTE
If the frequencies stored at the preset numbers receive
stations w hich w ere not originally memorized w hen traveling
long distances, the preset number is not displayed. In such
cases, pressing the 4 / ¢ button to use preset station
seek w ill receive channel 1.
• M anual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
N OTE
• Please see the Function Set System about selecting tuning
mode. (page 25)
• The ST indicator lights up w hen stereo broadcasts are being
received.
St at ion Preset M em ory
Store the frequency of a station. You can then recall that
station w ith a single touch of a button.
1
Select the band/ station that you w ant to have stored.
2
Press the button (#1-6) that you w ant to use for the station, for
at least tw o seconds.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
N OTE
You can store six stations in each of the FM 1, FM 2, FM 3, and
AM bands.
St at ion N am e Preset (SN PS)
You can assign nam es to radio stations w ith the Station Preset
M em ory. Up to 30 stations can be assigned nam es.
1
Adjust the frequency to the station w hose name you w ant to
enter.
N OTE
This function cannot be available during the clock display.
2
Press the NAM E.S button for at least tw o seconds.
"Name Set" is displayed once the station name preset mode is
entered.
The cursor w ill blink in the position w here letters are entered.
3
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
4
Each time the 38 button is pressed, the characters to be
entered change as listed below .
Press the FM or AM button to display the desired character.
Characters that can be displayed are as follow s.
— 10 —