IO. IDENTBHCATION CODES
IO. 1. DRIVE IDENTIFICATION NUMBER
The PROFIBUS-DP protocol requires an identification number for every kind of devices that can be connected
to the Bus.
The identification number assigned to the GE drives by the Profibus Nutzerorganisation is the following:
I
009Ah
hexadecimal corresponding to
154 decimal 1
10.2. CARD CONFIGURATION CODES '
The Profibus-DP interface card does not require user parameter data.
The configuration data consist of 2 Bytes made up as follows:
BYTE
1
2
VALUE
decimal - hexadecimal
183 - B7
183 - B7
PDP045
For the meaning of these bytes please refer to the paragraph 8.3.5 of the "Draft Standard PROFIBUS -DP DIN
19245 Part 3" manual.
10.3, DATA TYPE DISKETTE
This diskette contains the type files suitable for the Profibus-DP network configurator.
The files contained in the TYPEFILE
directory have to be copied in the directory where the configurator
program is installed.
The file contained in the WINCOM
directory has to be copied in the directory where the configurator for
WINDOWSTM
environment is installed.
,
1DENTIF:CATION
CODES