Baratza Encore How-To page 2

Lift the safety interlock
switch up and off of its
posts. Let it hang to the
side of the grinder.
Remove the three screws
securing the gearbox to
the chassis.
These screws may be
Phillips or Torx size
10. If you do not have
Torx, use 2mm hex.
Lift the motor/gearbox
assembly out of the
chassis and unplug the
grinder from the board.
www.baratza.com
Pg. 2
support@baratza.com
rev. 6/5/2019