Honeywell SmartLine RM60 Handbook page 58

OPERATION
6
Menu Function
No.
B.2.3 Device ID
B.2.4 Quick Setup
Sum.
B.2.5 TAG number
Temperature
B.2.6 Error Records
Measurement
Quality
B.2.7 Custom.
Length Unit
B.2.9 Custom. Conv.
Unit
C. Advanced setup
Menu Function
No.
C.1 Installation Setup
C.1.1 Installation
Type
C.1.2 Tank Height /
Measuring
Range
C.1.3 Application
Type
C.1.4 Stillwell Height
58
Function description
This displays device order no, V-no,
service no, Ex approval, Main CPU
version, Companion CPU version and
DSP version.
A summary of the parameters entered
in the quick setup menu
The TAG number can be seen and
updated here
Temperature of the electronics block.
The display will automatically switch
off if the temperature is below -20°C / -
4°F or above +60°C / +140°F.
A log of device errors. Scroll down the
list and push [^ ^ ^ ^ ] to display the error
details. Opening a log will remove the
error icon if it appeared in operator
mode.
Status of device errors at this time. A
"tick" symbol next to an error in the list
shows that this error is active and may
have an unwanted effect on the device.
Non-standard length unit for the
conversion table. This is defined by the
supervisor. Go to Supervisor > Supervisor > Supervisor > Supervisor >
Advanced Setup > Device Setup > Advanced Setup > Device Setup >
Advanced Setup > Device Setup > Advanced Setup > Device Setup >
Display Settings > Custom. Length Unit Display Settings > Custom. Length Unit Display Settings > Custom. Length Unit Display Settings > Custom. Length Unit
or follow the procedure in the
Conversion setup menu. Conversion
Conversion Conversion
Non-standard conversion unit for the
conversion table. This is defined by the
supervisor. Go to Supervisor > Supervisor >
Supervisor > Supervisor >
Advanced Setup > Device Setup > Advanced Setup > Device Setup >
Advanced Setup > Device Setup > Advanced Setup > Device Setup >
Display Settings > Custom. Conv. Unit Display Settings > Custom. Conv. Unit Display Settings > Custom. Conv. Unit Display Settings > Custom. Conv. Unit
or follow the procedure in the
Conversion setup menu. Conversion
Conversion Conversion
Function description
The installation on the silo for the
device.
"Tank height" is the distance from the
silo connecting flange face/thread stop
to the silo bottom. "Measuring range"
(for "Free Air Application" only) is the
maximum distance that the device
must measure.
The conditions in which the device is
used. If the surface of the product is
flat, select "Flat surface". If there is a
slightly uneven surface, select
"Medium slope". If the surface has a
steep slope, select "Steep slope".
Not available. For liquid applications
only.
www.honeywell.com/ps
SMARTLINE® RM60 (FMCW)
Selection list
Read only
Read only
?
Read only
Read only
Read only
Read only
Read only
Selection list
Metal / concrete silo,
Plastic silo,
Free Air Application
min-max:
0.20...80 m / 0.66...262 ft
Flat surface, Medium slope,
Steep slope
n/a
34-VF-25-31 iss.4 GLO December 15 US
Default
TAGNO0123
4567890
Default
Metal /
concrete silo
20 m / 65.61 ft
Medium slope
n/a