Input Select - Yamaha RX-V3800 Owner's Manual

Input Select

Use this feature to reassign digital input/outputs, select the
input signal, rename the inputs, or adjust the level of the
signal input at each input source.
Input source
XM
(U.S.A. and Canada models
only)
TUNER
MULTI CH
PHONO
CD
CD-R
MD/TAPE
BD/HD DVD
DVD
DTV/CBL
DVR
VCR
V-AUX or DOCK
PC/MCX, NET RADIO or
USB
Notes
• Some parameters described above may not be available for all
input sources and some parameters are only available for
specific input sources.
• When iPod is stationed in a Yamaha iPod universal dock (such
as YDS-10, sold separately) connected to the DOCK terminal
of this unit, "DOCK" appears in the "Input Select" menu
instead of "V-AUX". In such cases, the parameters marked with
asterisk (*) in the above table do not appear in the input source
parameter menu.
• When you select "NET/USB" as the input source, selected sub
input source (PC/MCX, NET RADIO or USB) appears in the
Input Select menu. You can set "Volume Trim" for each sub
input source separately.
Parameter
Antenna Level
Volume Trim
Rename
Volume Trim
Rename
Volume Trim
Rename
Multi CH Assign
BGV
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
I/O Assignment*
Audio Select*
Decoder Mode*
Volume Trim
Rename
Volume Trim
Graphical user interface (GUI) screen
Set the operation mode selector to D AMP
1
and then press G SET MENU.
The top display appears.
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
2
Press 4k / n to select "Input Select" and
then press 4 h.
Stereo/Surround
Input Select
Manual Setup
Auto Setup
3
Select the desired input source (CD, DVD,
etc.) and then press 4 h or 4 ENTER to
access and adjust.
Antenna Level (Antenna level)
(U.S.A. and Canada models only)
Use this feature to check the current reception level of the
XM Satellite Radio signals (see page 56). For the best
reception, adjust the orientation of the antenna of
connected Home Dock so that a value of 60% or more is
displayed here.
Display status: None, 0 to 100%
Antenna Level
Volume Trim
Rename
Notes
• "None" is displayed if the Home Dock is not connected to this unit.
In this case, check the antenna connections (see page 56).
• The "Antenna Level" parameter cannot be adjusted by using the
remote control. Instead, you need to adjust the orientation of the
antenna of Home Dock connected to the XM jack of this unit
for a better percentage of the reception level.
Sound
Video
Basic
NET/USB
Option
MD/TAPE
BD/HD DVD
DVD
DTV/CBL
DVR
Antenna Level
96%
81
En